A HIGH RELIABILITY TO STAMPING

PRODUCTS

Automatic Press Bottom Dead Point Monitoring Device
> RM-2305(RB/RX)
> RM-2402(BX)
> RM-2404(BX)
> RM-1310(V)
Bottom Dead Center Reference Value Monitoring Device
> RM-7302 , RM-7304(VX)
> RM-7201(GX)
Dynamic Displacement Acquisition System
> RM-3000(Ⅲ)
Miss Detection Unit
> RM-2703(BM)
Press Load Monitoring Device
> RM-7402 , RM-7404(VL)
Header Former Monitoring Unit
> RM-2803 , RM-2804(77)
Type of sensors
> RS-833H et al.
SG Spray System
> SG-K4
Download
> catalog

We provide a trusted brand for customers.

Provide the reliable brand to customers JAB ISO9001

SG SPRAY SYSTEM

  SG SPRAY SYSTEM
SG SPRAY SYSTEM
  SG-K4  
  This Spray System can prevent oil from spattering to
the outside and keep a clean work environment due to
spray-coating with very fine mist only to the extent necessary.
It can be a significant reducing press oil consumption
in oil coating processing.
SG-K4
Characteristics
 
  • It can be a significant reducing press oil consumption in oil coating processing.
  • It is effective in product accuracy and prevention of slug flow.
  • Since it is Teflon specification, it corresponds to drying characteristics and biodegradable processing oil.
  • Control and power source it is mechanical drive style with air, there is almost no trouble use in bad environment.
  • SG Spray System can install on small space with downsized nozzle,
Advantage
 
  1. It can be a significant reduction of oil consumption.
    70%-90% (12 Litter / month to 1 Litter / month)
  2. Saving cleaning cost.
  3. It is effective for stabilization of Bottom Dead Center accuracy.
    (improvement of slug detection rate)
  4. It can reduce defective products, and reduce precision defectiveness of bending /drawing and micro-punching by the excessive oil coating.
  5. Increase of the die / mold operation time.
  6. It can extend the die / mold life, and reduce maintenance number of times.
  7. Prevent oil stains around the machine and die / mold.
  8. Improvement in product image recognition.
  SPECIFICATIONS
To details
To the top